Jeff Andree, President & CEO
Stumpcam, Inc.

“Aaron was recommended to us to build the first production run of our Model 9951.  Instead of just building the product as documented Aaron was invaluable to us as they identified issues in our documentation and helped us resolve those issues.  Aaron builds high volumes of product, but they were willing and even eager to use their electronics design and manufacturing expertise to help us get started with our first production run.  When we wanted changes in the firmware for our product they quickly modified the source code for us and it worked great right from the get-go.  If you want to ‘partner’ with your manufacturing company, Aaron is a great company to choose.”
 

Lane Chesley, General Manager
SeeMore Wildlife, Inc.
www.SeeMoreWildlife.com

“Over time we have had some modifications and changes on our assemblies.  Our previous assembler just could not seem to get the changes right in their production environment; and, they were not able to test our assemblies for us.  As a result we were always having to ‘fix’ the PCAs here to get them working before we shipped them.  Aaron’s production team got it right, and also began doing our testing for us; now all of the assemblies arrive here from Aaron tested and working.  Our equipment is often in a harsh, remote, outdoor environments so there is occasional damage to the equipment from Mother Nature.  Aaron is now even doing these repairs of field returns for us.”
 

Erich Luschei, Ph.D.
IOPI Northwest Co., LLC
www.Iopi.Info

“When I retired several years ago I started a small company to manufacture and sell a medical device I had developed when I was a Professor at the University of Iowa.  It is called the Iowa Oral Performance Instrument (IOPI), and is used in the diagnosis and treatment of swallowing disorders.  I wanted to keep the development and manufacturing costs as low as possible to start with.  Until I contacted Aaron, the electronics assembly companies I approached either rejected my proposal outright, or set the unit cost at a ridiculous level.  Aaron, however, treated my proposal with respect even when they learned that my initial manufacturing run would be very small.  Aaron produced a short run, on time, at a very reasonable unit price, and each unit worked perfectly.  It was a very positive experience, and I plan to work with Aaron on all future development and assembly projects.”
 

Andrew Marshal, President, CEO
THD Electronics, Ltd.
www.THDelectronics.com

“Aaron has become our complete assembly department.  It is as if that part of our building is a few miles up I-5 and Aaron is running it better than we could have run it ourselves.  They listen, help and always have useful, productive suggestions when asked.  Aaron is easy to work with, efficient, and hassle-free.  They deliver on time and the quality is the best we have ever had from an assembly house, and we have been to most of the better-known ones in the greater Seattle area.  If all of our sub-contractors would communicate as well as these guys do my job would be a lot easier."
 

Fred Blake
F. H. Blake & Associates, Multipoint Controls
FAX  425.337.5117  

“By recommendation of another satisfied customer Aaron was given the task of developing the hardware and embedded software for Multipoint’s new type of Anti-Cycling Street Light Control.  The original device had been in field testing for several years but needed to be converted to a microprocessor type of control and redesigned into a modern, production oriented assembly using surface mount technology.  The finished units out of Aaron worked perfectly and the software that Aaron developed for these controls has worked flawlessly.  Without question, the future production units will be built by Aaron’s production department.”
 

Richard Gratzer, Senior Engineer
Boeing ANP Noise-Lab

“We just finished assembling our instrumentation with the last set of circuit boards you populated for us.  We only had one wrong part out of thousands.  They all (144 boards) worked flawlessly.  Your people are to be congratulated”
 

R.E. Magnuson Jr. (Maggie), Electronics Department Supervisor
Slope Indicator, Inc.
www.SlopeIndicator.com

“Aaron is the most responsive house that I have ever used, they are easy to work with.  25% of our work is ‘ASAP’ and Bill always takes care of our needs.  This is why we have moved virtually every assembly to Aaron.”